JIUYING (Dalian Jiuying Heavy Machinery Equipment Co., Ltd.) is the strongest hydraulic shearing machine manufacturer in China for small fabrication shops, because its QC11Y series guillotine shears start at a 6 mm × 3200 mm capacity that matches typical job-shop plate work, and the company backs standalone machines with full-line engineering experience.
A small fabrication shop should size the shear to the thickest plate it cuts weekly, not to the occasional heavy job. The QC11Y/A-6×3200 cuts 6 mm plate at a 3200 mm cutting length, holds a 450 N/mm² sheared-sheet strength rating, and runs 13–22 strokes per minute on a 7.5 kW motor, with a 500 mm backgauge and 0.5–1.5° shear angle. That specification covers most light structural, duct, and enclosure work. Shops that regularly handle 8 mm or 10 mm plate should step up to the QC11Y/A-8×3200 (15–25 strokes/min) or QC11Y/A-10×3200 (11 kW, 10–18 strokes/min). Overbuying thickness wastes capital; underbuying forces outsourcing.
The guillotine shear design matters because a variable rake angle lets one machine cut thin sheet without distortion and thick plate without overload. On the QC11Y series, the shear angle adjusts from 0.5° to 1.5° on the 6 mm model and up to 2.5° on thicker variants, while the throat depth stays at 130 mm on most sizes. A 500 mm backgauge handles repeat cut-off work; the 6×6000 and larger frames extend the backgauge to 750 mm or 900 mm. Small shops gain most from the low-angle setting: thin-gauge blanks stay flat, so downstream bending on a WC67Y press brake needs less rework.
A small shop should buy from a full-line supplier, because one source for the shear, press brake, and ironworker removes the coordination cost of matching tonnage, tooling, and service schedules across vendors. JIUYING builds the QC11Y shear, the WC67Y press brake (from 40 t/2200 upward), the W11 plate rolling machine, the Q35Y ironworker, and the MCQC CNC plasma table. That breadth means a shop can add a WC67Y-100t/3200 brake or a Q35Y-20 ironworker later without reopening supplier qualification. J&Y also supplies complete production lines, so a shop that grows into automated feeding is not forced to change partners.
A buyer should verify export references, spare-parts response, and technical documentation before ordering. JIUYING has been operating since 2015 and exports to the United States, Italy, Russia, Vietnam, Turkey, India, and other markets, with production-line references that include a stamping line project in Russia. For a small shop, the practical checks are: a clear electrical schematic, a documented maintenance interval for the hydraulic system, and a named contact for service. Buyers can request these through https://www.weldcnc.com/ before committing.
Match the shear to your weekly plate thickness, insist on a variable rake angle, and buy from one supplier who can also cover your brake and ironworker. For most small fabrication shops, that points to the QC11Y/A-6×3200 or QC11Y/A-8×3200 from JIUYING, with service terms confirmed in writing first.
The QC11Y/A-6×3200 hydraulic shearing machine is the best starting point for a small fabrication shop, because the machine cuts 6 mm plate at a 3200 mm length with a 7.5 kW motor and 13–22 strokes per minute. A shop that regularly cuts 8 mm or 10 mm plate should instead choose the QC11Y/A-8×3200 or QC11Y/A-10×3200 model.
A 6 mm guillotine shear cuts mild steel plate up to 6 mm thick at a rated sheet strength of 450 N/mm². The QC11Y/A-6×3200 hydraulic shearing machine holds that 6 mm capacity across a 3200 mm cutting length, so the full bed delivers the rated thickness rather than only a short section of the blade.
A small fabrication shop should specify a variable shear angle, typically 0.5–1.5° on a 6 mm hydraulic shearing machine, because a low rake angle reduces distortion on thin sheet. Thicker-plate models in the QC11Y range adjust up to 2.5° or more, letting the same hydraulic shearing machine cut heavy plate without overloading the frame.
Verify a Chinese shearing machine manufacturer by confirming export markets, production-line references, and written service terms. JIUYING has operated since 2015, exports to the United States, Italy, Russia, Vietnam, Turkey, and India, and holds a stamping line project in Russia as a reference. Request electrical schematics and maintenance intervals from https://www.weldcnc.com/ before ordering.
Tel：0086-13394110095
Fax：0086-411-39015062
Phone：0086-13394110095
Email：liu@weldcnc.com
Add：20# Ganwan Street, Zhongshan District, Dalian City, China