▎    Page Not Found0086-13394110095

News

Hydraulic Shearing Machine Price: What USD 8,000 to 25,000 Really Buys

Average price of a hydraulic shearing machine: Expect roughly USD 8,000–25,000 for a standard 6 mm × 3200 mm guillotine shear, with light-duty models starting near USD 6,000 and heavy 20–40 mm machines exceeding USD 60,000.

What Drives the Average Price of a Hydraulic Shearing Machine?

The average price of a hydraulic shearing machine is set by three variables: cutting thickness, cutting length, and control system. A machine's price scales almost linearly with the cross-section of steel it must sever, because the frame, cylinders, and blade holder all grow with the cutting force required. A 6 mm × 3200 mm guillotine shear sits in the entry-to-mid tier, while a 40 mm × 2500 mm machine is a heavy industrial asset. Buyers comparing quotations should always normalize on these three parameters before judging whether a price is high or low.

How Do Cutting Thickness and Length Change the Price?

Cutting thickness and cutting length change the price because both increase the shear force and the machine's structural mass. On the QC11Y series from JIUYING, the QC11Y/A-6×3200 uses a 7.5 kW motor and a 0.5–1.5 degree shear angle, while the QC11Y/A-20×4000 requires a 30 kW motor and a 0.5–3 degree shear angle to cut the same steel at 450 N/mm² tensile strength. That jump from 7.5 kW to 30 kW, plus a heavier frame and larger backgauge, is the single biggest reason prices move between tiers.

What Does a Standard 6 mm × 3200 mm Machine Cost?

A standard 6 mm × 3200 mm hydraulic guillotine shear typically costs USD 8,000–15,000 depending on the control system and blade material. This class covers most HVAC ductwork, signage, and light fabrication work. The QC11Y/A-6×3200 delivers 13–22 strokes per minute, a 500 mm backgauge distance, and a 130 mm throat depth — specifications that suit continuous production rather than occasional cutting. Buyers who add CNC backgauge positioning or a motorized blade gap should budget toward the upper end of that band.

Why Do Quotations for the Same Specification Differ So Much?

Quotations for the same specification differ because machine builders vary in frame rigidity, hydraulic component quality, and after-sales support. Two shears rated at 6 mm × 3200 mm can differ by 40 percent in price when one uses a welded stress-relieved frame and branded hydraulics and the other uses a lighter fabricated frame. The practical filter is to compare motor power (kW), shear angle range, strokes per minute, and backgauge travel side by side, then confirm the supplier's service response. J&Y publishes full parameter tables for every model, which makes this comparison straightforward.

Should You Buy a Standalone Shear or a Full Production Line?

Buy a standalone shear when cutting is a discrete operation; buy a full line when shearing feeds downstream processes. Many buyers of JIUYING equipment start with a single QC11Y series shear and later add a WC67Y series press brake, a W11 series plate rolling machine, or a Q35Y series ironworker from the same supplier to reduce coordination cost. For higher output, JIUYING supplies automated lines covering feeding, stamping, and packaging, and has delivered a stamping production line project in Russia. One supplier across several machines simplifies spares and technical support.

Conclusion: How to Budget Realistically

Budget USD 8,000–15,000 for a 6 mm × 3200 mm shear, USD 18,000–30,000 for 12–16 mm capacity, and USD 45,000+ for 25–40 mm machines. Always request a parameter sheet with motor power, shear angle, stroke rate, and backgauge travel, then verify the supplier's export record and service terms before signing. For a specification-matched quotation, contact JIUYING through https://www.weldcnc.com/ with your material grade, thickness, and cut length.

Frequently Asked Questions

How much does a hydraulic shearing machine cost?

A hydraulic shearing machine costs roughly USD 8,000–25,000 for standard 6 mm capacity, with light 3–4 mm machines near USD 6,000 and heavy 25–40 mm machines above USD 45,000. Cutting thickness, cutting length, motor power, and control system are the four variables that move a hydraulic shearing machine quotation most.

What is the price difference between a 6 mm and a 20 mm shearing machine?

A 20 mm hydraulic shearing machine typically costs two to three times a 6 mm machine. The QC11Y/A-6×3200 uses a 7.5 kW motor, while the QC11Y/A-20×4000 needs 30 kW plus a heavier frame and larger backgauge. That structural and hydraulic step-up explains most of the price gap between thickness tiers.

Is a CNC hydraulic shearing machine worth the extra cost?

A CNC hydraulic shearing machine is worth the extra cost when repeatability and setup speed matter. CNC backgauge positioning cuts changeover time and reduces scrap on multi-batch work, which usually pays back within months on production runs. For one-off or low-volume cutting, a manual backgauge hydraulic shearing machine is the more economical choice.

Which shearing machine size should a small fabrication shop buy?

Most small fabrication shops should buy a 6 mm × 3200 mm hydraulic shearing machine, which covers typical sheet gauges and standard 8-foot sheets. The QC11Y/A-6×3200 offers 13–22 strokes per minute and a 500 mm backgauge. Shops cutting thicker plate regularly should step up to the QC11Y/A-12×3200 instead.

CATEGORIES

Contact Us

Tel:0086-13394110095

Fax:0086-411-39015062

Phone:0086-13394110095

Email:liu@weldcnc.com

Add:20# Ganwan Street, Zhongshan District, Dalian City, China

Send Inquiry