Precautions for polishing machine operation

The selection of polishing machine and the precautions for installation and operation are as follows:

One. Matters needing attention in polishing machine selection:

1. We all want to buy useful equipment at a low price, which involves the issue of cost performance. Ask several manufacturers and compare them. When choosing a cost-effective polishing machine, you must also consider issues such as efficiency, maintenance costs, and transportation costs.

2. Choosing a polishing machine must first consider the size and brightness requirements of the workpiece to be polished. On the premise of meeting the polishing requirements, consider the overall stability of the polishing machine, whether the materials used are reliable, and whether the whole is firm.

3. If there are requirements for dust removal and environmental protection, a dust removal device can be installed. Many users now choose to install a dust removal device, which has a good improvement on the working environment of the operators.

Two. Matters needing attention in polishing machine installation and operation:

1. First, it is necessary to comprehensively analyze the soil pressure resistance and water level of the installation site. The installation and use requirements of the polishing machine must be met before the installation plan can be determined.

2. Try to clean the ground as far as possible when installing the polishing machine to avoid inconvenient cleaning after the polishing machine is installed.

3. The installation should avoid high-voltage transmission lines to avoid interference to the polishing machine.

4. An independent power supply is required to avoid sharing with other high-power electrical appliances.

5. The installation of the polishing machine requires a relatively spacious installation site, and it is important to have enough operating space.

6. The polishing machine can not be installed on ordinary muddy ground in rainy, humid, saline and other areas, otherwise many issues such as ventilation and drainage need to be considered.

7. The polishing machine must not be installed on the tuyere, otherwise the polishing machine will not operate well when the wind blows.

8. Before the connection of the polishing machine is energized, it must be safely grounded, and the machine must not be used without grounding to ensure safety.

9. The power distribution box of the polishing machine is equipped with an emergency stop button, which can stop the machine immediately when necessary.

10. Before starting the machine, check whether the polishing wheel is firmly assembled.

11. Be sure to cut off the power when installing or replacing the polishing wheel.

12. When installing the polishing wheel and the thousand impeller, check whether the angle of the sheet is upward.

13. The rotation direction of the polishing wheel must be the same as the direction of the arrow on the safety cover before starting up.

14. The workpiece must be placed in the workpiece groove, and it will automatically rotate when it is close to the polishing wheel and polish it forward.

15. Place the machine on a solid ground and correct the level so that the machine can work smoothly.

The selection of the installation location of the automatic polishing machine, customized polishing machine, and polishing machine equipment and the operation precautions are very important. Only the correct selection of the installation location and correct operation can ensure the service life of the automatic polishing machine, customized polishing machine, and polishing machine equipment.