What machines are there in the street lamp pole production line?

What are the machines for producing street light poles? Introduction of manufacturing process of street lamp pole production line

If you want to have a street lamp pole production line, it can be produced by different machines, but the general functions are similar, but the machines are different. Today, Jiuying introduces a cost-effective street lamp pole production line manufacturing process.

The specific technological process of the street lamp pole production line can be roughly divided into the following points: 1. Cut the steel plate into a suitable size. 2. Bend the metal material into a cylindrical shape. 3. Combine the cylindrical gap with seam welding. Welding flanges and appliance doors, etc. 4. Straightening (deformation after welding) and pipe bending (auxiliary mechanical straight pipes do not need to be used) 5. Grinding by grinding machine. 6. Surface painting or electroplating through electrostatic spraying production line. 7. Equipped with electrical appliances.

1. The cutting machine cuts the steel plate into suitable size.

The light pole cutting machine is mainly to unfold and cut the steel plate to the required specifications. Here, the gantry cutting machine is recommended, with high production efficiency and simple and convenient operation. If funds allow, Kaiping production lines can also be purchased, with higher production efficiency.

2. The Cnc daul linkage hudraulic press brake the metal material into a cylindrical shape

Because the light pole is long, a single bending machine cannot complete the bending of the steel plate, and a double-machine linkage bending machine must be used. There are various models of double-machine linkage bending machines, please consult your customer service personnel for details. If you want different styles of light poles, you can also customize the corresponding molds.

3. Use a welder to merge the cylindrical gap.

After the steel plate is bent, there will be gaps. At this time, it is necessary to use a welding machine to connect the plates. Before that, don't forget to install the corresponding wires. There are many mechanical equipments that can be welded, such as gantry hydraulic seaming machine, gantry large-diameter welding production line, and single-arm internal welding machine, which can be selected according to the actual model.

4. Straightening (deformation after welding) and pipe bending (auxiliary mechanical straight pipe does not need to be used)

In order to prevent the deformation of the lamp post after welding, it needs to be re-aligned, but this does not necessarily require machinery, it can also be done manually, and the specific needs are determined according to the budget. If you need a curved light pole, you need a bending machine, and again, there are different machines to choose from. If the light pole does not need to be bent, it can be omitted.

5. Painting/plating

The last step is to paint the light pole with a beautiful coat. Similarly, there are many options for this machine. You can set up a production line, or install several machines. You can choose according to your own needs, or you can directly consult the website service personnel.

In this way, a beautiful light pole is ready. In general, there are not many machines required to make a street lamp pole production line and it is a good investment option. If you have any questions, please contact us directly, we will reply as soon as possible.