JCO pipe Gantry type hydraulic Press Brake/Bending Machine

Main parameters of JCO pipe Gantry type hydraulic Press Brake/Bending Machine

Precision of machine tool and parts

1. Machine positioning accuracy: ±0.05㎜

2. Repeated positioning accuracy of the machine tool: ±0.05mm

3. Positioning accuracy of front and rear feeding: ≤1.5 ㎜

Anti-eccentric load capacity of the machine tool

The electro-hydraulic proportional servo system of this machine is a position control system. It can dynamically detect the synchronization error of the slider through the grating. The proportional valve of the hydraulic system corrects the synchronization error of the slider, so that the slider is in the complete eccentric load. Always keep parallel with the workbench under the condition.

The processing capacity of the machine tool

The finite element analysis of the force on the upper beam and the lower table beam under a uniform load of 3000 tons at a full length of bending (12200 mm) is as follows:

Upper beam: The maximum deflection at full load is 4.651. (The deflection deformation is the analysis of the deflection of the upper beam under full load. In practice, the upper beam is subjected to force under the state of separating the upper and lower positions of the upper die handle, so the actual deflection deformation Does not exceed 2.5)

Lower workbench: full load maximum deflection 2.866

FAQ

Q.How about the quality of JCO pipe Gantry type hydraulic Press Brake/Bending Machine?

A:The whole production procedure will be under regular inspection and strict quality control.The complete machine will be tested to make sure they can work very well before being out of factory.

Our machines all have passed CE Certificate, meet European and American standard, were exported to more than 32 Countries.

Q:If we don't know how to use the JCO pipe Gantry type hydraulic Press Brake/Bending Machine, can you teach us?

A:Yes, we will, English manual and video will come along with the machine.You also can contact our service team if you need any help during use our machines.

Q:How long is the warranty period of JCO pipe Gantry type hydraulic Press Brake/Bending Machine?

A:We commitment to client machines are one-year warranty.Warranty timing counted starting after equipment commissioning and acceptance.Our commitment is to your satisfaction with our products.In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone’s satisfaction.